Add Code GTO25* at checkout for 10% discount on Chemicals, Cleaning & Maintenance Equipment and 'NEW' For 2025

*Offer cannot be used with any item already on promotion, Sodium Hypochlorite or Carriage Charges

Lo-Chlor Heat Pump Cleaner

Lo-Chlor Heat Pump Cleaner is a powerful, non-foaming solution designed for deep cleaning of heat pumps and heat exchangers.

Supplied in 1 Litre.

£23.95

Free UK Delivery Over £60*
UK Mainland Only (Excludes Highlands)
Excludes Hot Tubs & Swimspas

All Prices include VAT
*Some product exclusions apply; see individual products for any applicable surcharges

Lo-Chlor Heat Pump Cleaner

The Lo-Chlor Heat Pump Cleaner is a heavy-duty, non-foaming solution specially formulated to clean heat pumps and heat exchangers with ease. By removing dirt, debris and buildup, it helps maintain peak energy efficiency and enhances overall system performance.


By regularly cleaning your heat pump, you can increase the COP (Coefficient of Performance) by ensuring maximum airflow through the fins. This optimizes the balance between recovered and issued energy, allowing your system to operate more efficiently and cost-effectively. Ideal for both residential and commercial applications, this cleaner is an essential maintenance solution for keeping your heating system running smoothly.

 

General Instructions

  1. Make sure the system is completely shut down and the power is disconnected before using the product.
  2. Spray the unit evenly from a distance of at least 5 cm (50 mm), working from top to bottom. Make sure the heating or cooling coil is fully covered with the cleaner for optimal results.
  3. Let Heat Pump Cleaner sit on the treated area for about 5–10 minutes to effectively break down buildup.
  4. Using a garden hose rinse with running water in a smooth motion from top to bottom.

 

Please Note: For heavily soiled heat pumps, a second application may be required.

CAUTION: Cleaning with a high-pressure cleaner and/or physically using a cloth can cause the evaporator fins to be pushed flat. Damaged fins will significantly reduce the surface area for heat transfer, resulting in inadequate colling, increased energy bills as well as decreased efficiency.

Overview

Lo-Chlor Heat Pump Cleaner

The Lo-Chlor Heat Pump Cleaner is a heavy-duty, non-foaming solution specially formulated to clean heat pumps and heat exchangers with ease. By removing dirt, debris and buildup, it helps maintain peak energy efficiency and enhances overall system performance.


By regularly cleaning your heat pump, you can increase the COP (Coefficient of Performance) by ensuring maximum airflow through the fins. This optimizes the balance between recovered and issued energy, allowing your system to operate more efficiently and cost-effectively. Ideal for both residential and commercial applications, this cleaner is an essential maintenance solution for keeping your heating system running smoothly.

 

General Instructions

  1. Make sure the system is completely shut down and the power is disconnected before using the product.
  2. Spray the unit evenly from a distance of at least 5 cm (50 mm), working from top to bottom. Make sure the heating or cooling coil is fully covered with the cleaner for optimal results.
  3. Let Heat Pump Cleaner sit on the treated area for about 5–10 minutes to effectively break down buildup.
  4. Using a garden hose rinse with running water in a smooth motion from top to bottom.

 

Please Note: For heavily soiled heat pumps, a second application may be required.

CAUTION: Cleaning with a high-pressure cleaner and/or physically using a cloth can cause the evaporator fins to be pushed flat. Damaged fins will significantly reduce the surface area for heat transfer, resulting in inadequate colling, increased energy bills as well as decreased efficiency.

Brochures
Useful Documents



2024 All Swim Catalogue
A.J & J.L Veysey | Company registration no: 1061642 | VAT no: GB133 4078 90
All Swim Ltd, Units 3-5 Link Trade Park, Penarth Road, Cardiff CF11 8TQ

Modal