NOTICE TO HEAT PUMP INSTALLERS

Please note installers must assess the property's electrical supply and notify the Distribution Network Operator (DNO) of any planned heat pump installations, as required by law. The reporting of a planned heat pump installation to the DNO is now a statutory requirement. 

Under the Microgeneration Certification Scheme (MCS), heat pumps must be installed at least 1m from neighbouring boundaries, though greater distances are likely to be necessary to comply with MCS document 020 noise calculations.

For advice or further information, contact us on: 02920 705050 or email us at: sales@allswimltd.com

Dantherm Heat Pumps

The Certikin budget range of Heat Pumps are an easy to install, affordable option for swimming pool water heating.  Designed and manufactured in collaboration with Calorex and the Dantherm Group, there are 4 models in the range; HPP6, HPP8, HPP12 and HPP15.

Features:

• Quiet operation
• Aesthetically pleasing design with an attractive graphite grey ABS cabinet
• Scroll or Rotary compressor (dependent upon product size)
• Titanium heat exchanger
• Reverse cycle defrost, enabling operation down to 3ºC air temperature
• Water temperature range 15ºC to 40ºC
• "Smart" pool pump control
• Condensate drain connection
• Supplied with 1.5" + 50mm socket unions for the water connections

Warranty:

• 1 year on site parts and labour
• 2 further years warranty - parts only

Models Available:

• HPP6:  Dantherm 6kW
• HPP8:  Dantherm 8kW
• HPP12: Dantherm 12kW
• HPP15: Dantherm 15kW

Specifications:

Power Supply 220-240V / 50Hz220-240V / 50Hz220-240V / 50Hz220-240V / 50Hz

Operating Range

Allow 500mm clearance to service panels.

Minimum air temperature -10ºC.

Water to have the correct balance pH 7.2-7.8, Free Chlorine 1.0-2.0 domestic, 3.0-6.0 commercial.

Dantherm reserves the right to change models without prior notice.

*Nominal conditions equal MCS007 test parameters.