Please Note: Castor Pack shown is not included with the end stands and must be ordered separately.

Often called the best domestic reel system on the market. It is manufactured in an anodised aluminium tube, mirror polished stainless steel end stands, plastic bearings and steering wheels with stainless steel axle crank handles.

Supplied with high quality bearings and two steering wheels fitted with crank handles. The Slidelock has been designed to enable you to cover your pool quickly and with minimum effort.

These reels can be supplied with a range of different end stands at no extra cost.

It has telescopic tube sections which slide and lock together. The straps are connected to the tubes by a plastic slide and lock fixing which makes the reel system easier and simpler to install and gives a greater rigidity.

It is manufactured in anodised aluminium tube and mirror polished stainless steel axle crank handles. The locking device enables the tube to lock into position, stopping the cover from unwinding.

There is a choice of end stands available for the reel which can be seen in the images above. All of these are available at no extra cost except for a set of castors/wheels which can be purchased as an addition to the roller.

Small Slidelock tubes for 3.7m - 4.9m
(4.6m Maximum Cover Width)

Large Slidelock tubes for 5.0m - 6.7m.
(6.4m Maximum Cover Width)

Reels should be set up to have a maximum 300mm overlap each side.

Maximum recommended area of material on both reels is 75m².