The Pentair IntelliFlo3 VSF Pool Pump leverages built-in sensorless flow control for optimum water flow adjusted to the pool’s conditions, keeping the pool performing at its best.
Set up, monitor and operate the pump from anywhere with wireless technology control through the Pentair Home App.
Technical Features:
- New motor, drive, pump design for unmatched efficiency.
- New permanent magnet motor design, made in Italy.
- 4g/l salt resistant.
- Unions included – 50 and 63mm (1.5HP), 63 and 75 mm (3HP model).
- Intelliprotocol communication (RS485) compatible with Intellipool (Fw 5.07) and Speedeo Connect.
- No need for communication cables – communication ports accept lead wires.
The Intelliflo Pool Pump makes use of the fact that a 50% reduction in water flow leads to a 90% reduction in power consumption. So you may have to run the pump for a longer time to achieve your filtration but you will use much less power in doing so. Also when you need to heat the pool the faster the water goes through the heater the better, so you can turn up the speed when in heating mode and turn it down when in filtration mode - all this at the touch of a button!
Want to calculate how much money you can save by swapping to a variable speed pump?
Click on this link, input your swimming pool details and electricity tariff to see how much you can begin saving per season - https://www.pentairpooleurope.com/calculators/pool-pump-savings
-
Simple Smartphone Control - The Pentair Home App gives seamless WiFi or Bluetooth® wireless technology control, so you can monitor the pump or change the flow rate from anywhere.
Gives comfort and peace-of-mind; the Pentair Home and Pro Apps alert both homeowners and service pros about real-time pump status, alerts and notifications.
-
Variable Speed and Flow - like dynamic cruise control, IntelliFlo3 auto-regulates/adjusts speed based on your pool’s changing conditions to keep flow constant; the “set-it-forget-it” way to clean healthy water
Up to 90% energy savings. Slower speed and regulated flow save energy and have a noticeable impact on that monthly utility bill.
-
Built-in automation - Two on-board relays allow you to schedule and control external devices, such as lights or salt chlorine generators.
Turns your pump into a basic automation system.
-
New synchronous permanent magnet motor and optimised pump design.
Its unique motor technology provides silence like no other: when running at a low speeds, it sounds like nothing more than a whisper.
-
Pentair Home connectivity
Get instant information on the status of all your devices 24/7.
Normal pool pumps have a motor and an on/off switch. They are either on full blast and pumping at one single speed or they are off. Intelliflo pumps can vary the speed at which the motor turns and so vary the flow through the pump. In doing so they use far less power but this does not mean your pool filtration will suffer.
Normal pool pumps have a copper wound motor that runs on a bearing. This makes noise and will wear out in time. Intelliflo pumps have a permanent magnet motor that spins without a bearing and so it makes no noise and does not wear out.
Features
- ENERGY SAVING Lower electricity bill and fast payback (1-3 years)
- LOW NOISE LEVEL Unnoticed when operating, quiet as a human whisper!
- WATER TREATMENT SAVING Optimised water flow = less and shorter filter backwashes = better water maintenance and minor lose of chemical and filter media.
- ENVIRONMENTALLY FRIENDLY Extremely low operation noise, high indirect impact in the reduction of CO2 emissions.
- WARRANTY 3 Years
- LONGER EQUIPMENT LIFE The motor protects itself from damage by adjusting for voltage variations as well as reducing it's speed to prevent motor overheating.