Easy build EPS Corner step unit for use with liner pools. Made from 25kgm³ density EPS block which is covered in shaped non-corrosive magnelis steel sheeting, the units are lightweight and easy to handle. No concreting or rendering is needed and with the adhesives included no specialist tools are required and the build time is one hour.

Available for both 90^o corners and 6" Radius corners.

• 1386 x 720 90^o / 6" Radius for pools up to 1020mm deep 870mm minimum water depth   - 3 Tread, 250mm Tread Size and 240mm Riser Size
  
  
• 1575 x 900 90^o / 6" Radius for pools upto 1200mm deep 1050mm minimum water depth  - 3 Tread, 300mm Tread Size and 300mm Riser Size  
  
  
• 1575 x 1200 90^o / 6" Radius for pools upto 1500mm deep 1350mm minimum water depth  - 3 Tread, 300mm Tread Size and 2 x 300mm and 1 600mm Riser Size
  
  
• 2000 x 1200 90^o / 6" Radius for pools upto 1500mm deep 1350mm minimum water depth  - 4 Tread, 300mm Tread Size and 300mm Riser Size
  
  
• Delivered boxed on a single pallet to be built on site
  
  
• Suitable for factory made and site applied vinyl linings

NOTE: All EPS steps need a minimum of 150mm water above the top tread.