Cov Deck

Suitable for year round use, it can be used as a play area, a place to relax or an outdoor dining area over the pool, and then when the pool is needed the deck easily rolls open and becomes surround decking to the pool.

As a modular system it can be installed on most domestic pool shapes and sizes, as long as there is sufficient firm, level ground available around the pool. The system is based around an aluminium frame which rolls along tracks on rollers with stainless steel needle bearings. The Deck closes completely and is entirely rigid with modules which roll together, fasten with a quick acting mechanism and then lock against the track. It needs no electrical connections and is easy and quick to install.

• Makes the most of your space around and over your pool
• Suitable for existing or new build pools
• Complies with safety standard NF P 90-308
• Easy to install – no electrical connections
• Suitable for almost any shape of pool
• Prevents evaporation and heat loss
• Slows down the development of algae
• Integral PVC membrane helps keep pool clean
• Quick and easy operation
• Aluminium modular frame running on rollers with stainless steel needle bearings – each module has a bearing capacity up to 2000kg max (including decking)
• Module lengths from 2.5m to 8.5m in 250mm increments
• 6 module heights possible between 19 and 37cm according to module lengths and coping heights
• Tracks can be installed on length side or width side of pool, but sizing restrictions apply if installing to width side
• The mobile deck is supplied without the finished cladding
• Optional Insulation - 60mm closed cell insulating panels can be inserted between two PVC membranes
• The ground onto which the Cov Deck tracks are to be secured MUST be SOLID, LEVEL and NON-MOBILE
• Only suitable for in-ground pools, swimspas and spas
• Optional motorisation enables an easy and fast opening and closing - a 24 volt motor including a wireless remote control, a wired key switch, control panel and drive rack with steel reinforcement. All models are fitted with holes allowing later motorisation if required.
  
  

This is a made to order item so please contact us for a quotation.