Bayrol Spa Time Pipework Cleaner

Over a period of time pipework can become contaminated. The impurities in the pipework absorb the disinfectant, causing problems with the water treatment. Bayrol Spa Time Pipework Cleaner consists of special granules for deep cleansing of the spa pipework.

Dosing Recommendations
Use 200 g/m³ for cleaning the spa before changing the water. For cleaning the pipework Add 200g per m³ of Bayrol Spa Time Pipework Cleaner to the filter cartridge or dosing device and let the pump run for approximately 5 minutes. Should dosing in the filter cartridge or skimmer not be possible, dissolve the granules in a bucket with approximately 5 Litres of water and dose directly into the spa with the pump running. Allow the granules to soak for approximately 1 hour and again briefly circulate. Then drain the spa and rinse with clean water. Do not use the spa during this treatment. If necessary, clean the spa with SpaTime Surface Cleaner and then fill with fresh water. 

General Precautions

Dosing

• Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction may occur.
• Do not pour this product into a skimmer that contains, chlorine/bromine tablets or any other product.

Handling/Storage

• Handle products in a well ventilated area - preferably outdoors.
• Wash hands after use.
• Ensure lid is replaced and sealed after use - store in a cool dry place.