Bayrol Alca-Plus is a granular product for stabilising a fluctuating pH level due to a value of the total alkalinity (TA) below 80 mg/L. Total alkalinity should be maintained at between 80 - 150mg/l (ppm). 

The total alkalinity has a huge effect on the pH value, and can make adjustment extremely difficult in case of a deviation of the recommended set value. Alca-Plus prevents pH fluctuations, and brings the water back into balance.

Dosing

Check the Total Alkalinity value at least once per week and if necessary, adjust to the ideal range 80 - 120 mg/l. To raise the TA by 10 mg/l dose 180g per 10 m³ - dissolve the required quantity of granules into a clean container and in clear water.  Make sure the container is absolutely free of foreign substances before adding the granules. Always apply granules to water and not vice versa. Dose the solution in several places directly into the pool water with the circulation pump running.

Important Note: Do not add in the skimmer (prevent contact with chlorine tablets).

General Precautions

• Wear eye and face protection and ensure granules are not blown back into your face.
• Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
• When pre-dissolving always add product to water and not vice versa.

Handling/Storage

• Handle products in a well ventilated area - preferably outdoors.
• Wash hands after use.
• Ensure chemicals do not become damp in storage - store in a cool dry place.
• Keep out of reach of children.
• Avoid release to the environment.
• Weat protective gloves/eye protection.
• Do not mix with other chemicals.
• Do not swallow.