The Aquasparkle Bromine Pod provides up to 6 weeks sanitisation in hot tub and pool water and is compatible with most existing in-line dosing systems.

Aquasparkle Bromine Pod provides continuous in-line sanitation by producing active bromine to kill bacteria and potentially harmful organisms. The Aquasparkle Bromine Pod will make caring for your hot tub water easier than ever.

The in-line Bromine Pod delivers enough bromine directly into your hot tub water without the need to measure or handle chemicals and delivers consistent sanitiser dosing. 

The Aquasparkle Bromine Pod is designed to be flexible and can be installed in a number of ways:

1. Using an In-built Proprietary Hot Tub Dosing System (or Frame)

Attach the Aquasparkle Bromine Pod to the chemical dispenser frame or chamber using the adaptor clip provided. Ensure that the Aquasparkle Bromine Pod is firmly attached to the adaptor clip, and the adaptor clip is firmly attached to the chemical dispenser frame.

It takes a while for bromine tablets to begin to dissolve, so it may be appropriate to first shock treat to immediately establish chlorine or bromine residuals. Add the appropriate amount of Shock treatment, as per the product label dosing instructions. Always test your hot tub water prior to use and maintain bromine levels between 4 to 6 mg/l (ppm). 

NOTE: This initial shock dose applies when using the AquaSPArkle Bromine Pod in any of the 3 installation types.

2. Use with a Darlly Sanistream Open-Top Filter, or Open-Top Filters fitted with a Stopper Device in the centre of the cartridge

To install the Aquasparkle Bromine Pod into an open ended cartridge filter, lower the Pod ensuring the top is upright, until it rests onto the Pod retainer grid. Then install the cartridge filter in the hot tub.

3. Use with a Darlly Sanistream Handle-Top Cartridge Filter, or other Cartridge Filters that contain a Cap to accommodate the Clip-In of the Pod Lugs

To install the Aquasparkle Bromine Pod into a cartridge filter of the closed-cap type, first twist the handle anti-clockwise and remove the cap.  Install the Aquasparkle Bromine Pod in the cartridge filter cap by locating the two protruding lugs on the top of the Pod into the underside of the cap, then twist until it clicks to lock the pod in place.  Insert the Aquasparkle Bromine Pod and cap assembly into the cartridge filter by locating the lugs of the cap into the slots, then twisting clockwise to lock the cap into the cartridge filter. Then return filter to the hot tub.

Variable output settings make the Bromine Pod suitable for standard domestic or heavy use plus holiday cover, so no need to worry about dosing the water when you go away - what could be simpler?